Advanced Rubber Vulcanizing Machine/Rubber Products Moulding Press Machine

1.High quality 2.Most competitive price 3.ISO9001Certificate 4.Import-export rights

We are a leading rubber machinery manufacture in china and we have our own professional design group.

1.main technical parameters

Model		XLB-D1000*1000*1	XLB-D/Q1200*1200	XLB-D600*600	XLB-D400*400*2
1	Norminal mouldning power(MN)	2.50	3.15	1.60	0.5
2	Plate size (mm)	1000*1000	1200*1200	600*600	400*400
3	Plate pressure (Mpa)	2.5	2.19	4.4	3.1
4	Piston diameter(mm)	450	600	360	200
5	Number of hydraulic cylinder (pcs)	1	1	1	1
6	Piston stroke(mm)	300	800	300	250
7	Distance between hot plate(mm)	150	800	300	125
8	Working layer number	1	1	1	2
9	Pressure of working fluid  (Mpa)	15.7	17.7	15.7	16.0
10	Total heat power(KW)	24	36		9.0
11	Heat type	electricity	vapor/electricity	electricity	electricity
12	Maximum working temperature	200°C	200/170  °C	200  °C	200  °C
13	Configuration type	Frame	Frame	pillar	pillar

2. Performance introduction:

1). It is controlled by PLC and touch screen for manual control and auto control. The auto control can realize many auto works such as mould closing, air exhausting, temperature control, vulcanization timing, alarming and discharging load when mould opening etc; the touch screen will timely show the temperature of the heating platen at each heating zone.2) .The hydraulic cylinder is made of ZG270-500, the ram is made of close-grained chilled alloy cast iron by casting and fine grinding; the hydraulic cylinder is well sealed by YX shape sealing ring.3).The guard edge of heating platen adopts hydraulic pressure automatic prop up iron, under the function of four oil cylinder, the iron cushion at two sides of the lower platen will advance and retreat at the same time; there are anti-superpose iron cushion device at the two sides of platen.4) .There is a set of valve group of temperature adjuster on each heating area for the platen. Under the controlling of PLC, it can guarantee the even temperature of each heating area.5) .Hydraulic pressure system: We adopt the famous brand hydraulic pressure station from the domestic and abroad, under the controlling of PLC, it can realize the auto mould closing, air exhausting and load discharging when opening mould.6).The in-phase balance device of the machine: there is an axis that runs through the machine sets below the platform, gear wheels and racks are designed on the two sides of the axis, which can guarantee the horizontal lifting for the platform.7).The guiding device for mould closing: it is designed on the two sides of the lower mat platform, there are guiding seats for the frame board and platform, the guiding seats is produced with incline and the incline distance can be adjustable by the prop up screw.8) .Mould opening booster: during the mould opening, the four oil cylinder below the platform will start working and forcibly pull down the platform, which can prevent the mould from sticking.

Contact Person: Bella Xue

Office phone: 0532-83132191/83137817 

 

Office Fax:  0532-83137817

Mobile phone: 13325017346 

Advanced Rubber Vulcanizing Machine/Rubber Products Moulding Press Machine